Software-Support AndonWIRELESS

Download Software

Manual
Date: 17.01.2022 - Size: 5.6 MB

Support Contact

Technical Support
E-mail: support@werma.com
Phone: +49(0) 7424 9557-222

Important notes:

Version 1.0.17.214

Changes to the previous release:

Devices which are flashing red due to a defective firmware and are performing resets very fast can now also be updated with the software or a new firmware can be uploaded. The reset loop is interrupted
Text "Status of button LED with external power supply" corrected to "Status of button LED with external power supply
New firmware file for AndonWIRELESS Box
- Additional checksum in AndonWIRELESS mode (backward compatible, but firmware update recommended)
- Timeout on send attempt taken over from transceiver
- Button LED state "As in battery mode" fixed, so that LEDs go off again as soon as button is released, even in USB mode; in addition, LED state is now updated immediately after configuration is transferred

Version 1.0.15.196 RTM - Maintainance SW+FW Update

Changes from previous release:

Switch to Microsoft .NET 6.0 (MS support for .NET 5 ends in May 2022).
Update of the FTDI USB driver to the current version 2.12.36.4 (setup file is now CDM212364_Setup.exe)
Fix: "FT_Read() failed to read 2 bytes", after a factory reset
New firmware files for transceivers
- Adjustments for optimized manufacturing process
- Firmware support for WeAssist
- Transmit power corrected for US devices
- General bugfixes / reliability improvements
New firmware file for AndonWireless
- Transmit power for US devices corrected
- General bugfixes / reliability improvement

Included firmware:

Version 1.0.11.182 RTM - Firmware Update

Changes to the previous release:

New firmware files for AndonWirelessBox and transceiver
- Devices could hang in rare cases during regular operation and then stopped responding
- Firmware now supports US devices
When connecting a device for which a firmware update is available, the user is now notified and the firmware update dialog is opened if necessary.
Preparation US version:
- Frequency band is displayed at radio channel
- Frequency band is displayed in the device details
- When importing a configuration file, it is checked whether the configuration was created with the same country version/frequency band.
Included firmware:
- Transceiver: revision 4, master-branch commit id 68d742f0a6eee2e997e54136e236d3d15c701f2a.
- AndonWirelessBox: revision 3, master-branch commit id 7e346fc0aab1770054e5f1a96ae8d4abf33a6d23