WIN transm. performance KS 70 24VAC/DC

  • Economical wireless-based Machine Data Collection system (MDC system)
  • Now available for use in North America
  • Analyse and optimise production processes
  • Machine status and part count monitoring of a wide range of different
  • machines
  • Minimal installation effort and intuitive software
Part No.: 860.840.15
Voltage: 24V AC/DC
Protection rating: IP54
Diameter in mm: 70 mm
Height in mm: 66 mm
  • FCC
  • IC
  • RED
  • cULus

$ 1,224.53*


$ 1,224.53*

Mechanical data
Height 66 mm
Diameter 70 mm
Materials PC
Housing colour Black
Protection category IP54
Connection USB
Working temperature minimum -20°C
Working temperature maximum +50°C
UL Type Rating Type 12
Weight with packaging 119 g
Product weight 102 g
Electrical data
Operating voltage 24V
Operating voltage type AC/DC
Operating voltage frequency 50Hz
Operating voltage tolerance +/- 10%
Rated operational voltage 24 VDC
Rated operational current 40 mA
Rated inrush current 430 mA
Protection class Protection class 2
Pollution degree 3
connectivity WIN
Optical data
Service life optical 50,000 h maximum
WIN is equipped with several protection mechanisms, which prevent the transmissions being intercepted. In addition, confidential data from the WIN system will not transmitted wirelessly.
If the status of the signal tower changes, the WIN transmitter sends this new status to the WIN receiver within 5 seconds. If the signal status does not change, the WIN transmitter transmits the signal status every 15 seconds.
You can do the following:
• Data will only be logged, whilst the WIN software is working. Make sure that this is the case during the monitoring period.
• Check the connection quality in the Routing Module. If there are red connection lines, you should use more WIN transmitter as repeaters. Simply position a WIN transmitter at the critical location (Optimize transmission range see chapter 7.6.4).
• Ensure that a permanent 24V supply is connected to terminal 5 of each WIN transmitter.

Online manual