WIN ethernet receiver 115-230VAC BK

  • Only suitable for North America
  • Receiver can be located close to the operation without being connected
  • to a PC
Part No.: 860.000.07
Voltage: 115-230V AC
Protection rating: IP20
Width in mm: 76 mm
Height in mm: 30 mm
Depth in mm: 80 mm
  • FCC
  • IC
  • RED

$ 2,104.36*


$ 2,104.36*

Mechanical data
Length 80 mm
Width 76 mm
Height 30 mm
Materials ABS
Housing colour Black
Protection category IP20
Connection USB
Working temperature minimum 0°C
Working temperature maximum +40°C
Weight with packaging 423 g
Product weight 378 g
Electrical data
Operating voltage 115-230V
Operating voltage type AC
Operating voltage frequency 50Hz at 230V
60Hz at 115V
Operating voltage tolerance +/- 10%
Rated operational voltage 230 VAC
Rated operational current 160 mA
Rated inrush current 800 mA
Protection class Protection class 2
Pollution degree 2
Overvoltage category II
Isolation voltage Ui = 250V; Uimp = 2.500V
connectivity Ethernet
WIN is equipped with several protection mechanisms, which prevent the transmissions being intercepted. In addition, confidential data from the WIN system will not transmitted wirelessly.
If the status of the signal tower changes, the WIN transmitter sends this new status to the WIN receiver within 5 seconds. If the signal status does not change, the WIN transmitter transmits the signal status every 15 seconds.
You can do the following:
• Data will only be logged, whilst the WIN software is working. Make sure that this is the case during the monitoring period.
• Check the connection quality in the Routing Module. If there are red connection lines, you should use more WIN transmitter as repeaters. Simply position a WIN transmitter at the critical location (Optimize transmission range see chapter 7.6.4).
• Ensure that a permanent 24V supply is connected to terminal 5 of each WIN transmitter.

Online manual

Other customers also bought the following products